docs(readme): flesh out and update README

README.md

@@ -1,5 +1,7 @@
 # git-next
 
+- Status: Alpha - dog-fooding
+
 `git-next` is a combined server and command-line tool that enables trunk-based
 development workflows where each commit must pass CI before being included in
 the main branch.
@@ -14,12 +16,19 @@ the main branch.
 
 ## Prerequisits
 
-- Rust 1.76.0 or later
+- Rust 1.76.0 or later - https://www.rust-lang.org
 - pgk-config
 - libssl-dev
+
+### x86_64-unknown-linux-gnu
+
+Additionally for this platform, to improved compilation times:
+
 - clang-16
 - mold
 
+See `.cargo/config.toml` for how they are configured.
+
 ## Installation
 
 You can install `git-next` using Cargo:
@@ -28,15 +37,141 @@ You can install `git-next` using Cargo:
 cargo install --path .
 ```
 
+Not yet available to install from `crates.io`.
+
+## Branch Names
+
+`git-next` uses three branches, `main`, `next` and `dev`, although they do not
+need to have those names. In the documentation we will use those names, but
+each repo must specify the names of the branches to use for each, even if they
+happen to have those same names.
+
 ## Configuration
 
-- The repo has a `.git-next.toml` file in it's root. (N.B. see
+- The branches to use for `main`, `next` and `dev` must be specified in either
-  [#28](https://git.kemitix.net/kemitix/git-next/issues/28) for a planned
+  the `.git-next.toml` in the repo itself, or in the server configuration file,
-  alternative)
+  `git-next-server.toml`. See below for details.
 - CI checks should be configured to run when the `next` branch is `pushed`.
 - The `dev` branch _must_ have the `main` branch as an ancestor.
 - The `next` branch _must_ have the `main` branch as an ancestor.
 
+### Server
+
+#### http
+
+The server needs to be able to receive webhook notifications from your forge,
+(e.g. github.com). You can do this via any method that suits your environment,
+e.g. ngrok or a reverse proxy from a web server that itself can route traffic
+to the machine you are running the git-next server on.
+
+Specify the address and port the server should listen to for incoming webhooks.
+This is the address and port that your reverse proxy should route traffic to.
+
+- **addr** - the IP address the server should bind to
+- **port** - the IP port the server should bind to
+
+#### webhook
+
+Your forges need to know where they should route webhooks to. This should be
+an address this is accessible to the forge. So, for github.com, it would need
+to be a publicly accessible HTTPS URL. For a self-hosted forge, e.g. ForgeJo,
+on your own network, then it only needs to be accessible from the server your
+forge is running on.
+
+- **url** - the HTTPS URL for forges to send webhook to
+
+#### storage
+
+`git-next` will create a bare clone of each repo that you configure it to
+monitor. They will all be created in the directory specified here. This data
+does not need to be backed up, as any missing information will be cloned when
+the server starts up.
+
+- **path** - directory to store local copies of monitored repos
+
+#### forge
+
+Within the forge tree, specify each forge you want to monitore repos on.
+
+Give your forge an alias, e.g. `default`, `gh`, `github`.
+
+e.g.
+
+```toml
+[forge.github]
+forge_type = "GitHub"
+hostname = "github.com"
+user = "username"
+token = "api-key"
+```
+
+- **forge_type** - one of: `ForgeJo` or `GitHub`
+- **hostname** - the hostname for the forge.
+- **user** - the user to authenticate as
+- **token** - application token for the user. See below for the permissions
+  required for on each forge.
+
+Generally, the `user` will need to be able to push to `main` and to _force-push_
+to `next`.
+
+#### repos
+
+For each forge, you need to specify which repos on the forge you want to
+monitor. They do not need to be owned by the `user`, but they `user` must have
+the `push` and `force-push` permissions as mentioned above for each of the
+repositories.
+
+e.g.
+
+```toml
+[forge.github.repos]
+my-repo = { repo = "owner/repo", branch = "main", gitdir = "/home/pcampbell/project/my-repo" }
+
+[forge.github.repos.other-repo]
+repo = "user/other"
+branch = "master"
+main = "master"
+next = "ci-testing"
+dev = "trunk"
+```
+
+Note that toml allows specifying the values on one line, or across multiple
+lines. Both are equivalent. What is not equivalent between `my-repo` and
+`other-repo`, is that one will require a configuration file within the repo
+itself. `other-repo` specifies the `main`, `next` and `dev` branches to be
+used, but `my-repo` doesn't.
+
+A sample `.git-next-toml` file that would need to exist in the `user/other`
+repo, on the `main` branch:
+
+```toml
+[branches]
+main = "main"
+next = "next"
+dev = "dev"
+```
+
+- **repo** - the owner and name of the repo to be monitored
+- **branch** - the branch to look for a `.git-next.toml` file is needed
+- **gitdir** - (optional) you can use local copy of the repo
+- **main** - the branch to use as `main`
+- **next** - the branch to use as `next`
+- **dev** - the branch to use as `dev`
+
+##### gitdir
+
+Additional notes on using `gitdir`:
+
+When you specify the `gitdir` value, the repo will be used for perform the
+equivalent of `git fetch`, `git push` and `git push --force-with-lease`.
+
+These commands will not affect the contents of your working tree, not will
+it change any local branches. Only the details about branches on the remote
+forge will be updated.
+
+Currently `git-next` can only use a `gitdir` if the forge is the same one
+specified as `origin`. Otherwise the behaviour is untested/undefined.
+
 ## Behaviour
 
 Development happens on the `dev` branch, where each commit is expected to
@@ -77,7 +212,7 @@ gitGraph
 
 It will then wait for the CI checks to pass for the newly updated `next` branch.
 When the CI checks for the `next` branch pass, it will push the `main` branch
-fast-forward to the `next` branch.
+fast-forward to the `next` branch. We return to the top and start again.
 
 ```mermaid
 gitGraph
@@ -93,7 +228,7 @@ gitGraph
 ```
 
 If the CI checks should fail for the `next` branch, the developer should
-**amend** that commit in the history of their `dev` branch.
+**amend** that commit **in the history of their `dev` branch**.
 They should then force-push their rebased `dev` branch.
 
 ```mermaid
@@ -114,27 +249,38 @@ gitGraph
 ```
 
 `git-next` will then detect that the `next` branch is no longer part of the
-`dev` branch ancestory, and reset `next` back to `main`.
+`dev` branch ancestory, and will reset `next` back to `main`.
 We then return to the top, where `git-next` sees that `dev` is ahead of `next`.
 
+When the `dev` branch is on the same commit as the `main` branch, then there
+are no pending commits and `git-next` will wait until it receives a webhook
+indicating that there has been a push to one of the branches. At which point
+it will start at the top again.
+
 ### Important
 
 The `dev` branch _should_ have the `next` branch as an ancestor.
 
-If the `git-next` server finds that this isn't the case, it will **force-push**
+However, when the commit on tip of the `next` branch has failed CI and is
-the `next` branch back to the same commit as the `main` branch.
+amended, this will not be the case. When this happens `git-next` will
+**force-push** the `next` branch back to the same commit as the `main` branch.
 
-In short, the `next` branch **belongs** to `git-next`.
+This is the only time a force-push will happen in `git-next`.
+
+In short, the `next` branch **belongs** to `git-next`. Don't try to update it
+yourself. `git-next` will update the `next` it as it sees fit.
 
 ## Getting Started
 
 To use `git-next` for trunk-based development, follow these steps:
 
-### Initialise the repo
+### Initialise the repo (optional)
 
-You need to specify which branches you are using
+You need to specify which branches you are using. You can do this in the repo,
+or in the server configuration.
 
-To create the default config file, run this command in the root of your repo:
+To create a default config file for the repo, run this command in the root of
+your repo:
 
 ```shell
 git next init
@@ -147,7 +293,8 @@ three branches _must_ exist in your repo.
 
 ### Initialise the server
 
-The server uses the file `git-next-server.toml` for configuration.
+The server uses the file `git-next-server.toml` for configuration. It expects
+to find this file the the current directory when executed.
 
 The create the default config file, run this command:
 
@@ -157,12 +304,7 @@ git next server init
 
 This will create a `git-next-server.toml` file. [Default](./server-default.toml)
 
-Edit this file to your needs.
+Edit this file to your needs. See the [Configuration](#configuration) section above.
-
-Specify the access token.
-
-The `branch` parameter for the repo identies the branch where the
-`.git-next.toml` file should be found.
 
 ### Run the server
 
@@ -174,7 +316,10 @@ git next server start
 
 ### Forges
 
-The following forges are supported: [ForgeJo](https://forgejo.org) and [GitHub](https://github.com/).
+The following forges are supported:
+
+- [ForgeJo](https://forgejo.org)
+- [GitHub](https://github.com/)
 
 #### ForgeJo
 
@@ -192,7 +337,9 @@ hello = { repo = "user/hello", branch = "main", gitdir = "/opt/git/projects/user
 world = { repo = "user/world", branch = "master", main = "master", next = "upcoming", "dev" = "develop" } # maps to the 'master' branch
 ```
 
-The token is created `/user/settings/applications` and requires the `write:repository` permission.
+The token is created on your ForgeJo instance at (for example)
+`https://git.myforgejo.com/user/settings/applications`
+and requires the `write:repository` permission.
 
 #### GitHub
 
@@ -217,7 +364,7 @@ The token is created [here](https://github.com/settings/tokens/new) and requires
 Contributions to `git-next` are welcome! If you find a bug or have a feature
 request, please
 [create an issue](https://git.kemitix.net/kemitix/git-next/issues/new).
-If you'd like to contribute code, feel free to submit a merge request.
+If you'd like to contribute code, feel free to submit changes.
 
 Before you start committing, run the `just install-hooks` command to setup the
 Git Hooks. ([Get Just](https://just.systems/man/en/chapter_3.html))

server-default.toml

@@ -8,6 +8,8 @@ url = "https://localhost:8080"
 [storage]
 path = "./data"
 
+[forge]
+
 [forge.default]
 forge_type = "ForgeJo"
 hostname = "git.example.net"